Roof Replacement in Mobile County, Alabama

Replacement vs. repair across Mobile County

A repair buys time; a replacement resets the whole system. When leaks show up in more than one place, or field shingles are shedding granules and curling, patching only chases the next failure. A full tear-off lets us see the roof deck and rebuild every layer to current standards.

Age and prior storm damage tip the decision. Once flashing, valley lining, and pipe boots are all near the end of their service life, replacing them piecemeal costs more than one clean re-roof. We give you an honest look before recommending either path.

How a Mobile County roof replacement is done

We start with a complete tear-off down to bare sheathing. Stripping the old roof is the only way to inspect the roof deck for soft spots, rot, and any unsupported sheathing edge that needs backing before new material goes down.

Deck re-nailing and a sealed roof deck come next. We re-nail the sheathing with 8d ring-shank nails on a tightened pattern, then create a sealed-deck method using taped seams or a self-adhered membrane meeting ASTM D1970, so if the roof cover is ever lost the deck itself still keeps water out.

Then we build the assembly up in order. Synthetic underlayment, drip edge and edge flashing at the eaves and rakes, starter strip, field shingles rated ASTM D3161 Class F / D7158 Class H, ridge and hip cap, plus new step and counterflashing at every roof-to-wall transition. Balanced ventilation, a proper dry-in, the county or city permit, and a final inspection close the job out.

What changes as you move across the county

Mobile County is not one roof type, so specs shift by location. Rural properties around Citronelle, Semmes, and Eight Mile often carry R-panel or exposed-fastener metal on homes and outbuildings, while Saraland, Satsuma, Chickasaw, and Prichard lean toward mid-century ranch homes on aging decks.

Bay-adjacent communities need corrosion-resistant details. In Theodore, Grand Bay, and Tillmans Corner, salt-laden air is hard on fasteners and flashing, so we choose corrosion-resistant metals at the drip edge, valley, and roof-to-wall zones. Aging mid-county decks almost always benefit from deck re-nailing before the new roof goes on.

Engineering the roof for coastal wind

Roofs here are designed against uplift, not just rain. We treat the field, perimeter, and corner roof zones differently because corners see the highest negative uplift pressure, then set fastening using the design Vult (ultimate design wind speed) and the exposure category for your specific site.

The goal is a tested assembly, not loose parts. Every layer, from the sealed roof deck to the ridge cap, works together so the whole roof behaves like the tested assembly it was engineered to be.

FORTIFIED re-roofs and the SAH grant

FORTIFIED is a stronger way to rebuild the same roof. A FORTIFIED Roof adds the sealed-deck method, enhanced edge details, and defined fastening that many Mobile County homeowners use to qualify for insurance credits.

The wind portion of your premium is where credits usually apply. Carriers commonly show roughly 35-60% off the hurricane portion and 20-35% off the other-wind portion of the wind premium; verify the exact figures with your carrier. Alabama's Strengthen Alabama Homes (SAH) grant offers up to $10,000, roof only, to help fund a FORTIFIED re-roof.

Warranty and what to expect

You get two kinds of coverage. A manufacturer material warranty stands behind the shingles and components, and our workmanship and material warranty stands behind how the roof was installed.

On the insurance side, ask about two clauses. Ordinance-or-law coverage can pay for code-required upgrades exposed during tear-off, and recoverable depreciation is often released once the completed work passes final inspection. We keep you posted from permit through cleanup and that closing inspection.